Double Faucet Jockey Box – 70′ Coils – Faucet Hardware Kit

Whether you’re setting up for an event, or just want to get a better dispensing system for your next party, this double faucet beer jockey box kit is a big step up from your standard keg.

This 48 quart cooler has a fully-functional draft beer faucet and shank pre-assembled in its side. The two included 70-foot stainless steel jockey box coils should be kept in an ice bath to provide an ultimate refreshing experience with each effortless pour. Since the coils are made of stainless steel, they will not corrode over time if maintained and cleaned properly. The extra long 70′ design means that the beer takes longer to travel through the coils and there is more surface area for your beer to be cooled by the ice water bath, meaning your beer will be as cold as possible when it reaches your glass.

Perfect for one-day parties or catered affairs, jockey boxes are a dream come true for anyone looking for a way to set their event apart. To fully connect your jockey box, you’ll also need a keg, beer lines, a CO2 tank, a CO2 regulator, and a you’ll be serving.

This jockey box kit includes a 48-qt cooler, two 70-ft stainless steel coils of 5/16″ outside diameter, two 3″ beer shanks attached to the front of the jockey box, two 3″ cooler couplings attached to the back, and two chrome-plated draft beer faucets on the front with tap handle faucet knobs attached to them. It also includes 12 total fittings: a hex nut, ferrule, and rubber grommet on either side of the each coil for easy attachment.

To use, make an ice bath for the coils of ice cubes and water. Set up your jockey box no more than 10 feet from your ice cold keg(s). Attach the beer line from the top of the keg coupler to the cooler coupling, and the air line from the outlet barb on the CO2 regulator to other side of the coupler. Adjust the keg regulator to 40-60 PSI based on your setup. Keep both the jockey box coils and keg cold throughout to avoid foaming (no more than 40° F).

Be sure to wash out your lines and coils after each use, just as you would normally . Check out our for more information on completing your setup.

• Perfect for easy dispensing at parties or events
• Pour two separate beers with two faucets available
• Faucets and shanks come pre-assembled into side
• Ultra-portable for maximum convenience
• Stainless steel coils keep beer cold and will not corrode over time
• Extra long 70-foot coils made for maximum cooling of beer
• Includes drain for easy disposal of water
• , , , and sold separately

• Cooler Dimensions: 24″ W x 15″ H x 14″ D
• Cooler Capacity: 48 Qt
• Overall Coil Dimensions: 9.5″ H x 5.25″ W
• Coil Dimensions: 70′ L x 5/16″ OD