Perlick Lo-Boy Low Profile US Sankey Keg Coupler – D System – Stainless Steel

Original price was: $144.99.Current price is: $96.99.

100% Quality Satisfaction

Online assistance, always just a message away.

Multiple payment methods, 100% payment security

Safe Payments, the Smart Choice

Setting up your draft beer system in small refrigerator can be a challenge — but it’s not impossible. This Perlick low-profile keg coupler is designed for tight clearance installations.

The keg coupler’s job is to connect your CO2 tank to the keg so the gas can push the beer up through the beer line. The bottom of the coupler attaches to the keg valve, and the beer line and air line slide over the horizontal hose nipples and secured with screw clamps.

With 100% stainless-steel contact, you can be sure that this beer coupler will last for a very long time, and that unwanted chemicals will not enter your beer and taint its quality.

With standard keg couplers, you need a few inches of clearance above the top of your keg. But with a low-profile design, this keg coupler only sticks up about ¾ inch above the rim of the keg. So you’ll have an easier time installing and operating your keg setup in limited space.

This keg coupler uses the US Sankey (D System), which is the valve system of choice for just about all beers brewed in North America, including Budweiser, Michelob, Busch, Miller Lite, Coors, Killians, Sam Adams, Labatt, and more. To be safe, check our handy to find out which system your favorite beer calls for.

This handy beer coupler is a great choice for both home and commercial bars.